Complete guide how to recover, revive bootloop Lenovo A319. This is your last resort how to recover it! Just follow tutorial below.
also read → Change Bluestacks Resolution using Notepad
also read → Change Bluestacks Resolution using Notepad
What you Need
- Firmware (Stock ROM) Lenovo A319: Download
- Latest Version of SP flash tool : Download
- Lenovo A319 USB Driver (MTK Driver) : Download
To ensure what is firmware used by your device, you can check by go to Setting ->About -> Software Information ->Build Number.
Flashing Lenovo A319
- Install driver for Lenovo A319 that already downloaded before.
- Extract firmware and flash tool then save in drive d:
- Then remove your back case, battery, sim card and SD Card if installed
- Now, Connect your Lenovo A319 to PC or Laptop, while holding the power button and volume up. The PC will detect the new hardware, just ignore it.
- Then, release USB data cable from the PC.
- Open SP flash tool software (for windows 7 or 8 you can run it by administrator) and click scatter load. find Lenovo A319 scatter storage location earlier.
- In the Scatter Loading field go to the folder where you extracted the Flash Tool and select MT6752_Android_scatter.txt
- Then you click options ->Download -> then check DA DL all with checksum.
- On download tab, ensure you have selected download only option from dropdown menu, see below picture.
- Then, click download button on top right and connect your Lenovo A319 with USB cable in phone switch off position.
- Process will run automatic, and you can see the red stripe showing download percentage at bellow
- When your process complete, you can see a green circle with tick mark.
- Then disconnect your Lenovo A319
- Put you battery again.
- Then, start your Lenovo A319. (remember, on the first booting it will take a long time to start)
- Done! You have successfully flash / install firmware on your Lenovo A319.
ConversionConversion EmoticonEmoticon
Note: Only a member of this blog may post a comment.